|
Bergey 1kW Service and Repair
It was great to work on 1kw Bergey today.
We were able to hoist down the turbine and repair the electrical components that were damaged.
replaced the rectifying circuit and some old transfer wiring.
lifted it up back in place like new to start making power again.
Like always it was great to service another customer that needed us.
Regrads
FEI group
Bergey 1kW Specifications
Type: 3 Blade Upwind
Rotor Diameter: 2.5 m (8.2 ft.)
Start-up Wind Speed: 3 m/s (6.7 mph)
Cut-in Wind Speed: 2.5 m/s (5.6 mph)
Rated Wind Speed: 11 m/s (24.6 mph)
Rated Power: 1000 Watts
Maximum Power: ~ 1,300 Watts
Cut-Out Wind Speed: None
Furling Wind Speed: 13 m/s (29 mph)
Max. Design Wind Speed: 54 m/s (120 mph)
Blade Pitch Control: None, Fixed Pitch
Overspeed Protection: AutoFurl
Gearbox: None, Direct Drive
Temperature Range: -40 to +140 Deg. F
Generator: Permanent Magnet Alternator
Output Form: 24 VDC Nominal
